A&MT can provide, apply, and repair almost any of your driveway surfaces with a quick and efficient service to suit you. As experienced surfacing contractors, we offer many surfaces suitable for driveways including asphalt, bitmac, block paving, pervious paving, surface dressing, slurry sealing and resin bound surfaces.
We have provided high quality driveway surfacing services across the UK, and we’re proud of the strong working relationship we’ve developed with our clients over time.
If you think we could help you with your driveway project, contact us today for a friendly chat or for a free, no-obligation quote.
Get a Quote
Find out more about this service below:
ResurfacingSurfacesFootways/Paths Surface Dressing Resin Bound AggregatesLocations We ServeWhy Choose A&MTFAQs
Driveway Resurfacing Contractors
Providing the surface has not been badly damaged, A&MT can resurface straight over the top of your existing surface quickly and efficiently. We ensure a seamless finish and will sweep or power wash the surface to ensure it’s clean and that any loose particles or contaminants are removed. If you need quality driveway resurfacing contractors, contact our team today.
Driveway restoration is the process of taking your current driveway and placing another surface on top of it. This aims to improve its looks as well as the ability it has to do its main function. You can use materials such as block paving, asphalt, resin bound surfaces and much more. If you need driveway restoration services, contact us today.
New Asphalt Driveway
We provide high-quality new asphalt driveways for any property. Like with any construction, the surface must have good load-bearing. We, therefore, recommend a total thickness of sub-base and asphalt of 280-300mm. We can send a member of our team to assess your requirements and advise on the specifications to ensure your new drive is perfect.
Repairing Driveways, Edges and Drainage Systems
If there are cracks on your surface, we can apply a special membrane with a hot bitumen to cover them. Once the membrane is covered, it remains flexible and prevents cracks from reopening. We then apply adhesive to form a strong bond between the old and new surface.
If the asphalt surface has been damaged or deteriorated beyond repair, we can professionally remove all or part of the base and surface course and relay the new surface. As professional drainage providers, we can also complete full repairs on your drainage systems.
Resin Bound Driveways
Resin-bound driveways consist of a mixture of aggregate stones and resin and is favoured for being a flexible surfacing material that is durable and resistant to cracking.
Our sales director can arrange a site visit to advise on the thickness of your resin bound driveway and discuss a suitable form of edging for your boundary which is usually made with concrete, metal or brick.
We start by excavating and compacting the base so that a membrane can be applied. This membrane prevents contamination between the soil and the sub-base. Once the sub-base has been well-compacted, we can apply an open textured base course.
To create the resin bound surfaces, we mix the resin and aggregate together on site in a large rotary paddle mixer and transport it directly to the working area in wheelbarrows. It is then spread to the required thickness and levelled by hand-held steel trowels by our fully trained in-house tradesmen.
Slurry sealing is a thick bitumen or water-based material used for sealing the surface. This is used to prevent the top of the surface becoming loose, or water or ice penetrating the asphalt.
We apply the slurry by hand held rollers and squeegees to form a complete impervious surface, with a curing time of 48 hours. Before applying the slurry sealing, the surface must be clean and may require power washing to remove any loose materials.
There are three colours of slurry sealing to choose from, including red, green and black.
We construct footways and paths to a high standard, and ensure there is an adequate sub-base structure and edging to prevent cracking or movement.
There are many materials that can be used to form a footway, including concrete slabs, asphalt, bitmac, anti-slip resin bound aggregates, paving bricks and gravel. We can also provide a resurfacing service on an existing footpath with a fine asphalt, resin, slurry or hot tarmac and gravel dressing.
We can discuss your footpath requirements in detail and arrange an on-site visit to ensure you’re getting the right type of surface. The surface thickness you need will depend on whether your path is being used by pedestrians, cyclists, cars, or even HGVs. Our expert sales advisors can help ensure you’re getting a footpath that not only looks professional, but is built to last.
A&MT can design and draw up the complete construction from excavation to completion.
Surface dressing is often used to protect an asphalt surface which has started to crack or form potholes. However, badly damaged your driveway surface, we can reinstate them with a binder course.
We follow one of the cheapest and effective procedures for filling potholes and resurfacing, and we also offer an emergency pothole repair service within 48 hours of your call. We cut around the potholes with a floor saw, clean the base, and then fill the pothole with base course bitmac. The surface is cleaned to remove loose particles before a combination of hot bitumen polymer compound and gravel or granite aggregates are compacted.
Gravel is usually used for aesthetics. It is also softer on the eye, especially around older stone buildings or heritage sites. There are many types and colours of gravel that can be used and we have a collection of samples for you to choose from.
Resin Bound Aggregates
Resin bound aggregate is one of the hardest and smoothest surfacing materials on the market. Resin is a very strong and flexible material which offers versatile appearance with many colours available. We can also apply additional materials to form an anti-slip surface if required.
We can arrange a site visit and advise on the thickness of the sub-base and base course. Driveways or footpaths that are pedestrianised usually require a thickness of 10mm, while areas that have traffic will require a minimum of 18mm.
Our Previous Work
Locations We Serve
While our depots are based in Lincoln, Peterborough and Romford, we can complete driveway surfacing across the whole of the UK. Popular locations we serve include:
- Cambridgeshire: Cambridge, Peterborough, Ely, Huntingdon
- Lincolnshire: Lincoln, Grantham, Spalding, Stamford
- London: Romford, Croydon, Saffron Walden, Kingston-upon-Thames, Wimbledon
Why Choose A&MT
- Trusted family business since 1976
- Available 24/7, seven days a week – including bank holidays
- Emergency pothole repair team – can complete within 48 hours of your call!
- No quibble guarantee
- Drainage design and repair specialists
- Street Works Certification (SWQR Operative and Monitoring)
- Accredited by City & Guilds
Frequently Asked Questions
What type of aggregate do you use in your sub-base?
We use type 3 aggregate in our sub-base which is produced with a reduced amount of fines to improve drainage.
What is pervious paving?
Pervious paving usually comprises a layer of paving, a textile membrane and a sub-base, which is made up of aggregates. This surface is suitable for both pedestrian and vehicular traffic, and is designed so that rainwater can infiltrate through the surface and into underlying layers.
What driveway surfaces are available for my surfacing project?
We are able to complete your driveway surfacing using a range of materials such as asphalt, bitmac, block paving, pervious paving, surface dressing, slurry sealing and resin bound.
What does resurfacing mean?
We will cover your current surface with a new material to improve the way it looks and functions.
Get in Touch